Post by Saber on Feb 12, 2015 20:47:30 GMT
--Crafting--
Crafter: Saber
Recipient: Saskia
Recipes:
Metal Equipment x5 [Armor, Sword, Shield, Spear x2]
Materials Required: 1 Metal, 1 Coal, 1 Quencher
Equipment Reforging x3 [Armor, Sword, Shield]
Materials Required: 1 Metal, 2 Quencher
Intermediate Equipment Reforging x2
Materials Required: 1 Metal, 2 Quencher
Material Fee:--Paid by Crafter--
5 x (materials needed) x (materials' level)
5 x 3 x 64 = 960 x 5 = 4800 [Base Craft]
5 x 3 x 64 = 960 x 3 = 2880 [Reforges]
5 x 3 x 64 = 960 x 3 = 2880 [Inter.Ref Sword]
5 x 3 x 64 = 960 x 2 = 1920 [Inter.Ref Shield]
-Total-
12480 + 250 Subclass Fee = 12730 Gold
Requested Items:
Valkyria Empress – Level 64 – [Image] - Armor and protection is a warrior’s finest asset in battle. Ensuring that one’s body is protected against the elements and threats from enemies is key for any fighter in the field, but looking damn good while doing it is a bonus most soldiers try to achieve. This armor is a middle ground between the two; style and effectiveness. Made for royalty and beauty, the Valkyria Empress set is a major attempt at the balance. From the shape and layers of the shoulder plates, down to the very clicking sound the hells make with each step; this set is one to be both feared and admired.
Made out of a mix of iron and light metals, the metal has three main colors attached to it; a dark shade of grey, a pale white, and black. Mixed in as accents, there are several places where solid gold has been added to the armor both for additional protection, as well as for a dazzling look. However, the crafter as also used the wearer’s body to also add to the armor’s beauty. Armor covers the key areas of the body, protecting the user for majority of attacks. Other areas, however, lack such protection, allowing one to see the pale skin and body of the user. Warriors are not just machines of battle, but they are human as well.
The Valkyria Empress Set is split into four main pieces; the torso, the waist, the gauntlets, and the boots. The torso is a layered set of metals which have been molded to guard the wearer’s entire upper body, upper back, and shoulders. Underneath the armor, acting as a connector for the plates as well as a support brace for the user’s body, is a thin layer of cloth. This cloth holds all of the plates in place and keeps the metal from rubbing against the tender skin of the user. The actual armor for the torso is a collection of four metal pieces. On the chest there is a bulging convexed star. This stared plate is made out of reinforced iron and is dual layered. The rivets have been enhanced, allowing for nearly any strike to be easily deflected. The shoulder guards are comprised of a set of two plates, shaped to nestle comfortable over the upper bicep and protect down to just above the elbow. One plate sets just above the user’s actual arm, while a second plate hovers just above, held up by a thick layer of cloth. The dual layers create addition protection to shoulder attacks, and the cloth uses energy distribution to minimize damage to the bearer. On the backside of the armor is a set of skeletal-like plates. These plates shift and move directly with the user’s body. This set up promotes flexibility while not sacrificing protection. These armor plates are connected much like a harness and slide on and off the user with ease.
The next piece in the set are the gauntlets. The gauntlets are a layered set of finely molded and polished metals which cover from the elbow right down to the finger tips. The setup is simple. The outer side of the forearms is a collection of three layers of thin metal, all bound and melted together tightly. Each layer is slightly smaller than the previous, creating a sort of “stepping” effect from bottom to top. The top layer of the metal, however, is the layer which stretches the furthest. The two under layers of the gauntlets only protect the forearm, where as the top layer is the one which expands into the elbow guard, and this elbow section is also where the left and right arm vary. On the left arm, the gauntlet is given an over sized spike to it. This spike can be used in combat as a bashing weapon should the user be disarmed. On the right arm, there is a small slot where a shield can be connected. On both gauntlets, there is gold molded into the knuckles, giving the first sign of “flare”.
The next piece of armor in the set is the simplest, but also the most sexy; it is the waist armor. Taken directly from the measurements of the wearer, the waist armor follows the hips of the female this armor has been molded for, curving over them and accenting their feminine charm. The sides of the waist armor are skimpy, allowing for free and wide movements of the legs. The front region is also light and uses a cloth to cover up the general privatized zone of the wearer. The backside has an extension of the armor which covers the wearer’s buttocks from any brave souls. Out from underneath the hips and the backside of the armor is a long flowing white skirt which mimics that of flowing feathers.
The final pieces of this armor are the boots. Made out of the same metallic layered system as the other pieces, the boots are comprised of three thin, highly reinforced metal plates. Beneath them, a silky smooth cloth creates a barrier between the leg and the armor itself. The metal of the boots has been super-heated, strengthened, and then tempered to have a shimmering white gloss to it. Around the knee is a circular golden brace which has been polished and shined. On top of each of the knee caps, an extra metal plate with a large spike has been placed. Much like the spike on the left gauntlet, these have been made to deter attacks and can also be used in combat for unarmed strikes. The bottoms of the boots have been specially molded and formed to fit the more feminine foot and incorporate a cushiony cloth system to make long walks and fights much more comfortable. More cloth has been applied to the heel than the toe. At the heel and around the ankles, golden plating has been applied to not only increase the stereotypical sound of the clicking heels, but to also finish the stylish look of the armor.
[Level 60 Reforge Effects: Elemental Resistance to Darkness / Passive 0.5HP regeneration]
Made out of a mix of iron and light metals, the metal has three main colors attached to it; a dark shade of grey, a pale white, and black. Mixed in as accents, there are several places where solid gold has been added to the armor both for additional protection, as well as for a dazzling look. However, the crafter as also used the wearer’s body to also add to the armor’s beauty. Armor covers the key areas of the body, protecting the user for majority of attacks. Other areas, however, lack such protection, allowing one to see the pale skin and body of the user. Warriors are not just machines of battle, but they are human as well.
The Valkyria Empress Set is split into four main pieces; the torso, the waist, the gauntlets, and the boots. The torso is a layered set of metals which have been molded to guard the wearer’s entire upper body, upper back, and shoulders. Underneath the armor, acting as a connector for the plates as well as a support brace for the user’s body, is a thin layer of cloth. This cloth holds all of the plates in place and keeps the metal from rubbing against the tender skin of the user. The actual armor for the torso is a collection of four metal pieces. On the chest there is a bulging convexed star. This stared plate is made out of reinforced iron and is dual layered. The rivets have been enhanced, allowing for nearly any strike to be easily deflected. The shoulder guards are comprised of a set of two plates, shaped to nestle comfortable over the upper bicep and protect down to just above the elbow. One plate sets just above the user’s actual arm, while a second plate hovers just above, held up by a thick layer of cloth. The dual layers create addition protection to shoulder attacks, and the cloth uses energy distribution to minimize damage to the bearer. On the backside of the armor is a set of skeletal-like plates. These plates shift and move directly with the user’s body. This set up promotes flexibility while not sacrificing protection. These armor plates are connected much like a harness and slide on and off the user with ease.
The next piece in the set are the gauntlets. The gauntlets are a layered set of finely molded and polished metals which cover from the elbow right down to the finger tips. The setup is simple. The outer side of the forearms is a collection of three layers of thin metal, all bound and melted together tightly. Each layer is slightly smaller than the previous, creating a sort of “stepping” effect from bottom to top. The top layer of the metal, however, is the layer which stretches the furthest. The two under layers of the gauntlets only protect the forearm, where as the top layer is the one which expands into the elbow guard, and this elbow section is also where the left and right arm vary. On the left arm, the gauntlet is given an over sized spike to it. This spike can be used in combat as a bashing weapon should the user be disarmed. On the right arm, there is a small slot where a shield can be connected. On both gauntlets, there is gold molded into the knuckles, giving the first sign of “flare”.
The next piece of armor in the set is the simplest, but also the most sexy; it is the waist armor. Taken directly from the measurements of the wearer, the waist armor follows the hips of the female this armor has been molded for, curving over them and accenting their feminine charm. The sides of the waist armor are skimpy, allowing for free and wide movements of the legs. The front region is also light and uses a cloth to cover up the general privatized zone of the wearer. The backside has an extension of the armor which covers the wearer’s buttocks from any brave souls. Out from underneath the hips and the backside of the armor is a long flowing white skirt which mimics that of flowing feathers.
The final pieces of this armor are the boots. Made out of the same metallic layered system as the other pieces, the boots are comprised of three thin, highly reinforced metal plates. Beneath them, a silky smooth cloth creates a barrier between the leg and the armor itself. The metal of the boots has been super-heated, strengthened, and then tempered to have a shimmering white gloss to it. Around the knee is a circular golden brace which has been polished and shined. On top of each of the knee caps, an extra metal plate with a large spike has been placed. Much like the spike on the left gauntlet, these have been made to deter attacks and can also be used in combat for unarmed strikes. The bottoms of the boots have been specially molded and formed to fit the more feminine foot and incorporate a cushiony cloth system to make long walks and fights much more comfortable. More cloth has been applied to the heel than the toe. At the heel and around the ankles, golden plating has been applied to not only increase the stereotypical sound of the clicking heels, but to also finish the stylish look of the armor.
[Level 60 Reforge Effects: Elemental Resistance to Darkness / Passive 0.5HP regeneration]
[b][u]Valkyria Empress [/u][/b]– [i]Level 64[/i] – [a href="http://i.gyazo.com/cd07a0a1a188a1787be9b5f5efcf68f3.png"][Image][/a] - Armor and protection is a warrior’s finest asset in battle. Ensuring that one’s body is protected against the elements and threats from enemies is key for any fighter in the field, but looking damn good while doing it is a bonus most soldiers try to achieve. This armor is a middle ground between the two; style and effectiveness. Made for royalty and beauty, the Valkyria Empress set is a major attempt at the balance. From the shape and layers of the shoulder plates, down to the very clicking sound the hells make with each step; this set is one to be both feared and admired.
Made out of a mix of iron and light metals, the metal has three main colors attached to it; a dark shade of grey, a pale white, and black. Mixed in as accents, there are several places where solid gold has been added to the armor both for additional protection, as well as for a dazzling look. However, the crafter as also used the wearer’s body to also add to the armor’s beauty. Armor covers the key areas of the body, protecting the user for majority of attacks. Other areas, however, lack such protection, allowing one to see the pale skin and body of the user. Warriors are not just machines of battle, but they are human as well.
The Valkyria Empress Set is split into four main pieces; the torso, the waist, the gauntlets, and the boots. The torso is a layered set of metals which have been molded to guard the wearer’s entire upper body, upper back, and shoulders. Underneath the armor, acting as a connector for the plates as well as a support brace for the user’s body, is a thin layer of cloth. This cloth holds all of the plates in place and keeps the metal from rubbing against the tender skin of the user. The actual armor for the torso is a collection of four metal pieces. On the chest there is a bulging convexed star. This stared plate is made out of reinforced iron and is dual layered. The rivets have been enhanced, allowing for nearly any strike to be easily deflected. The shoulder guards are comprised of a set of two plates, shaped to nestle comfortable over the upper bicep and protect down to just above the elbow. One plate sets just above the user’s actual arm, while a second plate hovers just above, held up by a thick layer of cloth. The dual layers create addition protection to shoulder attacks, and the cloth uses energy distribution to minimize damage to the bearer. On the backside of the armor is a set of skeletal-like plates. These plates shift and move directly with the user’s body. This set up promotes flexibility while not sacrificing protection. These armor plates are connected much like a harness and slide on and off the user with ease.
The next piece in the set are the gauntlets. The gauntlets are a layered set of finely molded and polished metals which cover from the elbow right down to the finger tips. The setup is simple. The outer side of the forearms is a collection of three layers of thin metal, all bound and melted together tightly. Each layer is slightly smaller than the previous, creating a sort of “stepping” effect from bottom to top. The top layer of the metal, however, is the layer which stretches the furthest. The two under layers of the gauntlets only protect the forearm, where as the top layer is the one which expands into the elbow guard, and this elbow section is also where the left and right arm vary. On the left arm, the gauntlet is given an over sized spike to it. This spike can be used in combat as a bashing weapon should the user be disarmed. On the right arm, there is a small slot where a shield can be connected. On both gauntlets, there is gold molded into the knuckles, giving the first sign of “flare”.
The next piece of armor in the set is the simplest, but also the most sexy; it is the waist armor. Taken directly from the measurements of the wearer, the waist armor follows the hips of the female this armor has been molded for, curving over them and accenting their feminine charm. The sides of the waist armor are skimpy, allowing for free and wide movements of the legs. The front region is also light and uses a cloth to cover up the general privatized zone of the wearer. The backside has an extension of the armor which covers the wearer’s buttocks from any brave souls. Out from underneath the hips and the backside of the armor is a long flowing white skirt which mimics that of flowing feathers.
The final pieces of this armor are the boots. Made out of the same metallic layered system as the other pieces, the boots are comprised of three thin, highly reinforced metal plates. Beneath them, a silky smooth cloth creates a barrier between the leg and the armor itself. The metal of the boots has been super-heated, strengthened, and then tempered to have a shimmering white gloss to it. Around the knee is a circular golden brace which has been polished and shined. On top of each of the knee caps, an extra metal plate with a large spike has been placed. Much like the spike on the left gauntlet, these have been made to deter attacks and can also be used in combat for unarmed strikes. The bottoms of the boots have been specially molded and formed to fit the more feminine foot and incorporate a cushiony cloth system to make long walks and fights much more comfortable. More cloth has been applied to the heel than the toe. At the heel and around the ankles, golden plating has been applied to not only increase the stereotypical sound of the clicking heels, but to also finish the stylish look of the armor.
[i][Level 60 Reforge Effects: [font color="a132eb"]Elemental Resistance to Darkness[/font] / [font color="eb326d"]Passive 0.5HP regeneration[/font]][/i]
Edelweiss – Level 64 – Lavish swords of royalty which are wielded by Kings, Queens, and high ranking Knights always find their ways to the battlefield. Sometimes, these swords are for nothing but show, however some of them as just as deadly as the might of the leader’s armies. This blade, the Edelweiss, is just that. With a blade stretching for nearly four feet in length, a width of six inches, the Edelweiss is quite capable of destroying any enemy in its swing. The weapon is a fearsome sight, with a sharp royal design engraved into the side of the blade, and a fancy hilt to go with it. Taking the shape of a gun, but having a blade instead of a barrel, the first two thirds of the weapon are a slight feint. Whereas the final third of the weapon’s length is a comfortable handle that is made of a mixture of metal and leather in order to provide a stable and comfortable grip on the weapon itself. At the base of the squared pommel, the funeral parlor emblem has been engraved.
[Level 60 Reforge Effects: Heal HP equal to 15% damage dealt]
[Level 60 Reforge Effects: Heal HP equal to 15% damage dealt]
[b][u]Edelweiss [/u][/b]– [i]Level 64[/i] – Lavish swords of royalty which are wielded by Kings, Queens, and high ranking Knights always find their ways to the battlefield. Sometimes, these swords are for nothing but show, however some of them as just as deadly as the might of the leader’s armies. This blade, the Edelweiss, is just that. With a blade stretching for nearly four feet in length, a width of six inches, the Edelweiss is quite capable of destroying any enemy in its swing. The weapon is a fearsome sight, with a sharp royal design engraved into the side of the blade, and a fancy hilt to go with it. Taking the shape of a gun, but having a blade instead of a barrel, the first two thirds of the weapon are a slight feint. Whereas the final third of the weapon’s length is a comfortable handle that is made of a mixture of metal and leather in order to provide a stable and comfortable grip on the weapon itself. At the base of the squared pommel, the funeral parlor emblem has been engraved.
[i][Level 60 Reforge Effects: [font color="eb326d"]Heal HP equal to 15% damage dealt[/font]][/i]
Vylbrand’s Aegis – Level 64 – Not all of fighting is focused on offense. Much of it is actually preparing for an attack and responding. This item is a warrior’s best tool in that preparation; it is a shield. A cross between an actual shield and a buckler, the Vylbrand’s Aegis is too small to be listed as a regular item of protection, but far too large to be placed into the class of buckler. Instead, it is a cross between. Because of the Aegis’s size, it is able to be worn on the forearm, attached to the gauntlets of the Valkyria Empress set, or held in one’s hand. To enable this, two small center pieces come with the Aegis; one is a small connector piece to safely latch the shield on to the gauntlet, and a strap to allow the shield to be held.
The shield itself is a meager one foot six inches in diameter, but is comprised of several plates of iron. Each plate has been individually reinforced before being stacked and welded to the next plate. To hold them all in place and give the shield a smooth, shiny outside, one over sized plate blooms over top of them all, giving the shield its actual circular shape. On the front plate of the shield, the Vylbrand Academy emblem has been engraved into the shield and painted over with a golden flake. On the underside of the shield at its very bottom, the Funeral Parlor emblem has been engraved.
[Level 60 Reforge Effects: Elemental Resistance to Darkness]
The shield itself is a meager one foot six inches in diameter, but is comprised of several plates of iron. Each plate has been individually reinforced before being stacked and welded to the next plate. To hold them all in place and give the shield a smooth, shiny outside, one over sized plate blooms over top of them all, giving the shield its actual circular shape. On the front plate of the shield, the Vylbrand Academy emblem has been engraved into the shield and painted over with a golden flake. On the underside of the shield at its very bottom, the Funeral Parlor emblem has been engraved.
[Level 60 Reforge Effects: Elemental Resistance to Darkness]
[b][u]Vylbrand’s Aegis[/u][/b] – [i]Level 64[/i] – Not all of fighting is focused on offense. Much of it is actually preparing for an attack and responding. This item is a warrior’s best tool in that preparation; it is a shield. A cross between an actual shield and a buckler, the Vylbrand’s Aegis is too small to be listed as a regular item of protection, but far too large to be placed into the class of buckler. Instead, it is a cross between. Because of the Aegis’s size, it is able to be worn on the forearm, attached to the gauntlets of the Valkyria Empress set, or held in one’s hand. To enable this, two small center pieces come with the Aegis; one is a small connector piece to safely latch the shield on to the gauntlet, and a strap to allow the shield to be held.
The shield itself is a meager one foot six inches in diameter, but is comprised of several plates of iron. Each plate has been individually reinforced before being stacked and welded to the next plate. To hold them all in place and give the shield a smooth, shiny outside, one over sized plate blooms over top of them all, giving the shield its actual circular shape. On the front plate of the shield, the Vylbrand Academy emblem has been engraved into the shield and painted over with a golden flake. On the underside of the shield at its very bottom, the Funeral Parlor emblem has been engraved.
[i][Level 60 Reforge Effects: [font color="a132eb"]Elemental Resistance to Darkness[/font]][/i]
Gungnir – Level 64– Long and sharp, a weapon which has become a symbol of ancient war; the spear. This weapon is a prime example of how far times have changed from the basic, simple tools of the past to the intricate and snazzy looking weapons we wield on the front today. However, it is also a testament to the advances of old technology. This spear is different than other spears in how it looks, but it maintains the same general shape as those from long ago.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
[b][u]Gungnir[/u][/b] – [i]Level 64[/i]– Long and sharp, a weapon which has become a symbol of ancient war; the spear. This weapon is a prime example of how far times have changed from the basic, simple tools of the past to the intricate and snazzy looking weapons we wield on the front today. However, it is also a testament to the advances of old technology. This spear is different than other spears in how it looks, but it maintains the same general shape as those from long ago.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
Gungnir – Level 64– Long and sharp, a weapon which has become a symbol of ancient war; the spear. This weapon is a prime example of how far times have changed from the basic, simple tools of the past to the intricate and snazzy looking weapons we wield on the front today. However, it is also a testament to the advances of old technology. This spear is different than other spears in how it looks, but it maintains the same general shape as those from long ago.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
[b][u]Gungnir[/u][/b] – [i]Level 64[/i]– Long and sharp, a weapon which has become a symbol of ancient war; the spear. This weapon is a prime example of how far times have changed from the basic, simple tools of the past to the intricate and snazzy looking weapons we wield on the front today. However, it is also a testament to the advances of old technology. This spear is different than other spears in how it looks, but it maintains the same general shape as those from long ago.
The spear stands six feet tall from the pommel to the absolute tip of the fire-shaped head. Eighty percent of the weapon is a black, hollowed out iron shaft wrapped in gray leather straps. These straps vanish underneath the red coupler for the head of the weapon, and the red cylinder which makes up the barrier to keep the user’s grip from accidentally slipping during a thrust attack. The pommel is a symbol design, much like the basic shape of the shaft. It is circular and dome shaped, with the tip of the dome being pointed. It is here that the funeral parlor emblem has been engraved. At the opposite end of the spear, is the head. Every edge on the head has been sharpened, making it an extremely vicious tool of war. The blade is not a solid piece, either, but is more so shaped into that of a small spurt of fire. There is one large flame which jerks outwards, making up the main blade. On its back is a flattened “spine”, taking the shape of a fireaxe’s head. Just behind the fireaxe is a small curve spike. Behind them, and attached to the metallic coupler that holds the shaft and head together, is an additional blade that has been formed in the shape of a dragon’s wing. To add to its fierce look, the edges of the head have been stained black, while the cores have been given an orangish-fire color to them.
Standard Craft Thread:----
Speed Craft Thread: --Crafting + Reforge--
Bonuses: --Bonuses Posted with Crafts--
Equip the Item? ----
